How To Install An Asphalt Driveway

Verify that the contractor you're about to hire is actually a member of our websites! Go to www.hardsurfaceexperts.com Learn all the little secrets SOME contractors use to rip us off! Click on this link below: www.allaboutdriveways.com Learn how asphalt driveway installation SHOULD be done! Hi! I'm Patrick Mattingley. I've been working in the driveway business for well over a decade. I love the driveway business. Driveways are the first thing people see when they pull up to your home. I've looked at thousands of driveways since I started back in the 90's. Concrete driveways, asphalt driveways, interlocking paver driveways... even gravel driveways. I've seen some of the most beautiful driveways and I've seen of the worst driveways you could imagine! I started AllAboutDriveways.com because I got sick and tired of seeing people get ripped off by common driveway paving scams and gypsy asphalt scammers. It frustrated me to see people spend their hard earned money on asphalt driveway paving, sometimes to the tune of several thousands of dollars, only to get ripped off by some fly by night asphalt paving contractor. The kicker for me was meeting an older retired couple who had saved their money their entire lives to have their rural driveway paved. I gave them an estimate and immediately they said "Wow! You're twice as high as the other asphalt paving contractor that we have an estimate from." Having experience in the driveway business, I knew right away, they we're in for a ...



http://www.youtube.com/watch?v=z7jmib1ztQ0&hl=en

Recommend : Buy Best Price Buy Best Price Thai Food Seasoning World of Civil Engineering Toasters Model

How To Install Furring Strips to Concrete Walls

If you are planning to finish a basement you will most likely need to install furring strips to the concrete walls so that the walls can be sheetrocked.

Attaching furring strips to concrete walls can be easily done using 2"x2"s or 2"x3" kiln dried wood studs, liquid nail glue, and some fluted concrete nails.

Due to moisture in the basement, I prefer to use a 2"x4" pressure treated stud laid flat along the bottom of the wall. Lay the stud on its flat side up against the wall. The furring strips will sit on top of the pressure treated stud, such that there is effectively a moisture barrier between the basement floor and the kiln dried studs.

The kiln dried studs should be placed on 16 inch centers along the wall, again resting on the pressure treated 2"x4". The kiln dried studs should run the entire height of the concrete wall.

To secure the bottom plate and studs to the wall, I first run a bead of Liquid Nails (designed to adhere to concrete and wood), along the entire length of the bottom plate/stud. If you are using 2"x3"s for the furring strips, the glue should be applied to the wider side, such that when the stud is installed, you effectively have the flat side of the stud attached to the wall.

Start with the application of glue on the pressure treated bottom plate.

Next, using a drill and a masonry bit, drill pilot holes into the bottom plate. The holes should be placed every 16 inches along the length of the plate and should penetrate the concrete walls approximately 1.5". Then using 3" fluted nails and a 3-5 lb sledge hammer, pound the nails into the holes. Note: I prefer to drill and pound a nail, one hole at a time to eliminate alignment problems.

Once the bottom plate has been installed, repeat the process on the vertical kiln dried studs. Install one stud at a time, again on 16 inch centers. Make sure they stand straight and level.

To help hold the vertical stud in place while you are drilling holes and pounding in concrete nails, I like to toe nail the bottom of the stud into the bottom pressure treated plate first.

Once the glue has set up, the furring strips will be strongly fastened to the wall and ready for drywall.

Note, however, you may want to apply pink board insulation in between the studs to provide some level of insulation between the concrete walls and the finished sheetrocked wall. Simply cut the insulation to the proper width, apply some Liquid Nails to the back side of the insulation board, and then press the insulation in-between the studs.

See Also : Face Cleansers Silver Necklace Best Buy LCDTV Air ForceCivil Engineer

How To Install A Diagonal Pattern Tile Floor - part 1

(561) 756-4910 or 800-720-8061 Adilson Andrade www.facebook.com www.TileContractorMiami.com http www.ezinearticles.com www.youtube.com www.youtube.com www.youtube.com acistile.blogspot.com http www.twitter.com www.Tile-Bathroom.com http www.BathroomTileFlorida.com http www.BathroomTileFlorida.com A Diagonal Pattern Will Give Your Floor A Modern Look Professional tile work, ceramic, porcelain, travertine, Saltillo tile. Travertine and much more. Great prices, great work, free estimates, solid references Adilson Andrade http info@CeramicTileFlorida 800-720-8061 "This is Guido, I am the owner of Flavors of Italy here in Coral Springs Florida. The address is 3111 N. University Drive. Adilson here did 4 jobs for me. Great and wonderful. He did the bar. He did my terrace where people now can dance. The front of the house and the bathrooms. If you want to come and see his work, you're welcome. And I would highly recommend him. His work is impeccable. He's on time. He's one of the best guys in the business that I recommend. " Chef Guido Barisone www.flavorsofitaly.us 954-345-7770 3111 N. University Drive • Coral Springs, FL • 33065 Here's a summarized list of services we provide Bathroom Remodeling Drywall: installation of drywall, plaster & tape, texture Tile: installation of ceramic, marble & granite tiles in all sizes, shapes & designs. Tiling floors, walls, ceilings, counter tops & backsplash. Granite slabs for kitchen or bath counters and walls. Wooden flooring: Installation ...



http://www.youtube.com/watch?v=bcObRexC6EM&hl=en

My Links : Civil Engineering Civil Engineering Webboard Best Selling Products Rainforce Steel Concrete Engineer Concrete Structures