Making an 18650 Personal Vaporizer Box Mod Part 2 - Building It

In Part 1, I showed you the schematic and how it works. Now I show you how I build it and demo it in action. All the parts used in my mod came from: Radio Shack - the box, pushbutton, and battery holder (that I cut up for piece parts) - I could have gotten these from madvapes but happened to stop by my local Radio Shack for the fun of it. madvapes.com - the LED, resistor, battery-atomizer connector batteryjunction.com - They have a $30 deal on 2 protected 2400maH 18650 batteries and charger. Wow! Target - Hot glue Harbor Freight - JB stick Epoxy putty Be extremely careful working with lithium ion batteries. ALWAYS use a PROTECTED Lithium Ion battery so that it will not overcharge or under-volt because they will explode and burn. Recharge these batteries outside on concrete under constant supervision in case they explode and burn while recharging. Unplug the charger and remove the battery(ies) as soon as charging is complete. Please do NOT attempt to make a pv e-cig mod unless you are an experienced electronic technician or a well-seasoned electrical-mechanical engineer. Each solder connection is critical, make it mechanical and then solder. Always remember, exploding lithium ion batteries can burn down your house and/or kill you and the ones you love!!! This video is for educational curiousity interest only. Mod at your own risk. Filmed with a Kodak Zi8 Edited in Windows 7 with Windows Live Movie Maker



http://www.youtube.com/watch?v=kjK_oQG_51c&hl=en

See Also : สมัครงานราชการ Television Lcd Netbooks Black Friday BDC6900BlurayDisc1080p3D

MAKING A SPIDER WEIGHT BY MANUEL Z

surffishing.tripod.com (DO NOT ADD WWW.) I will demonstrate how simple it is to make a "repairable spider weight" using 4 nails, a block of wood copper wire and some scrap lead. Don't go to a construction site and steal the wire! When electricians wire a new building, they leave longer wires in the boxes and when ready to wire the plugs and switches, these are the chunks they pull off and throw away. I usually just ask them if they have any scraps and thats how I get mine, In the video... those are chunks I got from a friend a couple years ago. Now the lead is the same thing, Ask a plumber for old scrap "LEAD" pipes or go to your favorite tire shop (Small shops work best for me) and see if they have any old tire weights they want to get rid of - a couple of hand fulls will make you several good weights. WARNING Do not put hot lead on anything wet - It will pop and send hot lead everywhere... Believe me I know! **Manuel Z** RATE MY VIDEO!!!!!



http://www.youtube.com/watch?v=ZOQqi0fVH8w&hl=en

Visit : หมวดงานสถาปัตยกรรม วิศวกรรมโยธา SEO LCD 37 Inch 720p HDTV 42LD450LCDHDTV42Inch1080p

Making My Own Brickform Mold Concrete Walkway

What started out as a simple, "Oh, just lay down a few stepstones between the back porch and the gate" became this project. While shopping at Lowe's, I found these form molds in the concrete aisle, and bought two. Thought I'd give it a shot. I did it in 2 parts. For the back yard molds, I used a mixer. Mixing two bags at a time and then adding the color tint while still in the mixer. It has held up to Indiana winters well. This past summer, I did the walkway from the rear gate to the front gate. Created on June 8, 2009 using FlipShare.



http://www.youtube.com/watch?v=YOKRxOlQvoQ&hl=en

Thanks To : วิศวกรโยธา วิศวกรรมโยธา Netbook Best Deals Cheap